Using a desk, floor, or wheelchair mount
To mount your Touch Pad, you will need the optional dual mounting plate that will attach to either Daessy or ReHadapt.
Attaching the mounting plate
To attach the mounting plate, lay your Touch Pad with the screen facing down on a flat surface. To prevent damage to the screen, place the device on something soft like a towel, cloth or newspaper. You will need the supplied Allen key, mounting plate and the three screws.
Remove the stickers covering the three screw holes. Use the supplied Allen key to remove the three screws located on the back of the your Touch Pad as shown below
Mounting your Touch Pad on a desk or floor stand
With the correct mounting plate attached, you can fit the Touch Pad to your wheelchair mount, floor stand or desk stand. As you attach the device to the stand, be sure to hold the Touch Pad securely until the head of the stand is firmly docked with the mounting plate.
For further instructions on positioning see the documentation provided with your stand.
Last Revision: 10.08.2022